Garden Grafting Tool Multi-Function Seedling Fruit Tree Grafting Shears Farming Pruning Grafting Machine Budding with Toolbox

Features:

• Rootstock and scion it is easy to match the U-cut-cut or Ω-cut, rapid healing
  Using easily and fastly. Grafting method than the traditional savings
• The time and effort Blade can be replaced
• Use the pruner to cut useless branches from the plant

For the knife

• Materials: Carbon Steel, ABS and Aluminum
• Color: Black
• Cut grafting stocks from 5mm up to 1.4cm diameter
• Trimming blades 3mm thick
• Phillips screwdriver with red handle
• Size 27cm * 10cm/10.5inch * 3.9inch (1cm=0.39Inches)
• Blade type:"V" & "U" & Ω" &"M" Four shapes
• Storage box size: 6.2cm*23.5cm*17cm

Grafting tape

• Material: PE
• Length: about 120m long
• Width: 3cm

How to use:

• Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
• Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
• Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
• Step 4: Use the pruner to cut useless branches from the plant.
• Step 5: The grafting tool with "V" & "U" & Ω" &"M"blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.

Note:
Keep out of reach of children do not use on dry or old hard wood
Package Content:
1 x Pruning and grafting dual purpose scissors
1 x small wrench
1 x screwdriver
1 x 3cm PE tape
2 x "V" shaped blades
2 x "U" shaped blades
2 x "Ω" shaped blades
2 x "M" shaped blade
1 x Grafting knife holder